•
Do not pull on the power cable or the appliance itself to remove the plug from the power socket.
•
Do not move the appliance by pulling the cable.
INSTALLATION
•
After removing the packaging, check that the appliance is intact; if in doubt, do not use it and call
in qualified staff. Packaging components (plastic bags, nails, etc.) must not be left within reach of
children since they are potentially hazardous; dispose of them in accordance with the current law.
•
Before each use, check that the appliance is in good condition and ensure that the power cord is
not damaged and do not switch it on unless certain it is intact: if in doubt, call in qualified staff.
•
Make sure that the appliance is functioning correctly; otherwise, switch off the appliance and have
it checked by qualified staff.
•
Place the device in the same room (there must be no barriers between the appliance and the
device) on a smooth, horizontal, stable, non-slip supporting surface large enough to prevent it from
falling, well away from other heat sources (stoves, fan heaters, etc.), flammable materials (curtains,
liquids, gas cylinders, etc.) and from sinks etc. containing liquids.
•
Make sure that the cable is correctly positioned and is not wound around the device or twisted, to
prevent the device from falling. Check that no-one can trip over it, to avoid accidental falls or
injuries.
•
In case of a fault or malfunction, switch the appliance off and have it checked by qualified staff;
repairs by unqualified staff may be dangerous and lead to the loss of warranty cover.
DESCRIPTION
Smart device with integrated Wifi module, usable via Smartphone through the applications with
Android or iOS operating systems.
•
It stores and adjusts all the functions inserted on the remote control, such as: power on / off,
functions, channels, volume, etc.
•
Infrared remote controls must have a 38Khz frequency.
•
360° large-scale infrared signal coverage, with a distance of
≤
8 meters. The device must be
positioned so that there is free space; obstacles and walls prevent the device from working
properly.
•
Make sure that the router is for home use, the WiFi network should be set only to the 2.4GHz
frequency (5GHz frequency is not supported).
Generally, routers have double bands set: (2.4 and 5) GHz; most dual-band routers automatically
broadcast on both bands, for activation and configuration (of the fixed frequency at 2.4GHz) it
is necessary to access the IP address of the router and look for the network settings section.
•
Check that the router is for domestic use, that there are no access restrictions except the
password, that the Wi-Fi network is 2.4 GHz, and that there is a strong, uniform Wi-Fi signal in
the room where the device is to be installed.
•
Make sure that the smartphone is connected to the wi-fi network to be used for the appliance.
First Installation/Setup
1.1 Install the "BIMAR life Smart" App via Google Play (Android) or AppStore (iOS), or
scan the QR code provided here.
For Android
For iOS
