11
1. Place the tubes C1, C2, D, E, and changer
fabric on the floor with clips facing outwards
as shown in picture 1.
2. Insert the four tubes through the changer’s
fabric slots with plastic clip facing outwards.
(picture 2)
3. Connect the end of the four tubes using
the valco pins. (picture 3)
4. The assembled changer. (picture 4)
Assembling the Changer
Parts Needed:
(A) Playard
(B) Changer
(F) Long Changer Tube E
(C) Short Changer Tube C1
(E) Long Changer Tube D
(D) Short Changer Tube C2
C1
C1
D
D
E
E
C2
C2
2
1
3
4
NOTE:
clip position on tube C1, C2 and E should be facing outwards