Form No F030106A
11
Part No 840186
MV650H PUSH Vacuum Owner’s Manual
4. Attach upper handle brace to lower handle using
corresponding hardware. Then repeat this step on the
other side.
- Two 1/2” wrenches.
5. Attach rod end (164) to the nozzle door rod then
secure in place by tightening jam nut.
6. Attach nozzle door rod to the nozzle door using
corresponding hardware.
NOTE:
It is easier to do this with nozzle door closed.
- Two 9/16” wrenches.
7. Attach rod end to rod (as in step 5).
8. Attach nozzle door rod to the lever with
nozzle door closed and lever in hose kit
position.
NOTE:
Check to see nozzle door open and
close all the way (see page 15). Tighten or
loosen the rod end (164) for any
adjustments.
Two 9/16”
wrenches.
9. Install cable ty wraps.
10. Reconnect spark plug wire.
11. Attach the bag.
HERE
HERE
Summary of Contents for MV650H PUSH
Page 9: ...Form No F030106A 9 Part No 840186 MV650H PUSH Vacuum Owner s Manual PARTS LIST ...
Page 24: ...Part No 840186 24 Form No F030106A MV650H PUSH Vacuum Owner s Manual Engine Assembly Figure 3 ...
Page 26: ...Part No 840186 26 Form No F030106A MV650H PUSH Vacuum Owner s Manual Hood Assembly Figure 4 ...
