Not for
Reproduction
22
billygoat.com
Maintenance Procedures
Checking Engine Oil Level
IMPORTANT:
Avoid Engine Damage! Failure to check
the oil level daily could lead to serious engine prob-
lems if oil level is low.
Check oil level
before
operating.
Keep oil level between the FULL and the ADD marks.
Check oil level when engine is stopped, level, and is
cooled so oil has had time to drain into the sump.
NOTE:
Check oil
frequently
if you run engine all day.
Make sure engine is cool when checking engine oil
level.
Check oil between jobs during periods of heavy use.
NOTE:
Engine has an
OIL ALERT
light. If there is a
loss of oil pressure or oil stop engine immediately.
Check all oil levels. If warning light stays on for more
than 30 seconds after start shut off engine and check oil.
Engine Oil Level
Dipstick
Engine Oil
Fill
1. Park machine safely.
2. Check when engine is cool before use or allow
engine to cool.
3. Clean area around dipstick to prevent debris from
falling into crankcase.
4. Remove dipstick. Wipe with a clean cloth.
5. Install dipstick fully.
6. Remove dipstick and check oil level on dipstick.
Oil must be between the ADD and FULL marks.
•
If oil is low, add oil to bring oil level no higher than
the FULL mark on dipstick.
•
If oil level is above the FULL mark, drain to prop-
er level.
