background image

 

 

Part No 811202 

 

Form No F021307B  

 

5

HTR/TR Owner’s Manual

 

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

DO NOT 

run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. 

 

 DO NOT 

refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before 

refueling. 

 

 DO NOT 

store gasoline near an open flame. 

 

 DO NOT 

remove gas cap while engine is running. 

 

 DO NOT 

start or operate engine if strong odor of gasoline is present. 

 

 DO NOT 

start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has

completely evaporated. 

 

 DO NOT 

smoke while filling the fuel tank. 

 

 DO NOT 

check for spark with spark plug or spark plug wire removed. Use an approved spark tester. 

 

 DO NOT 

operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with

muffler deflector, inspect deflector periodically and replace if necessary. 

 

 DO NOT 

operate engine with grass, leaves or other combustible material near the muffler. 

 

 DO NOT 

touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns. 

 

 DO NOT 

leave equipment unattended while in operation. 

 

 DO NOT 

operate equipment with bystanders in or near the work area. 

 

 DO NOT 

allow children to operate this equipment. 

 

 DO NOT 

operate equipment with guards removed. 

 

 DO NOT 

operate

 

equipment near or pick up hot or burning debris or any toxic or explosive materials. 

 

 DO NOT 

operate

 

equipment on slopes greater than specified in Specifications section of this manual. 

 

 DO NOT 

start engine without height adjust lever in up position and clutch bail disengaged. 

 

 DO NOT 

place hands or feet inside nozzle intake, near debris outlet, or near any moving parts. 

WARNING: Important 

DO NOT

 use this machine for vacuuming 

exclusively

 sand, dust, fine dirt, rock, glass, string like material, grain, rags, 

cans, metal, bark or water. 

 

 DO NOT

 start engine without hose and exhaust elbow connected firmly in place to housing and outlet. 

 

 DO NOT

 operate without discharging exhaust into enclosed container. 

 

 DO NOT

 operate with hose or exhaust elbow removed 

 

 DO NOT

 remove hose until engine has been turned off and has come to a complete stop. 

 

ALWAYS 

remove spark plug wire when servicing equipment to prevent accidental starting. 

ALWAYS 

check fuel lines and fittings frequently for cracks or leaks. Replace if necessary. 

ALWAYS 

keep hands and feet away from moving or rotating parts. 

ALWAYS 

store fuel in approved safety containers.

 

Summary of Contents for HTR1803V

















Reviews: