Part No 500402
7
F020513A
BC2403 Series Brush Cutter Owner’s Manual
OPERATION
O
PERATOR
C
ONTROLS
The operator’s station is at the rear of the machine between the handlebars. The operator should STAND in a position to
allow
both handlebars to be grasped firmly and which allows sufficient leverage to steer the machine. Operator’s controls are
shown below.
Operator Control Locations
1
Blade Clutch Lever
5
ON/OFF Switch
2
Gear Shift Lever
6
Drive Clutch Lever
3
Choke
7
Pull Starter
4
Throttle
S
TARTING
CHECK
engine oil level before operating machine.
1. Place equipment on a level, firm surface that is free of rocks or other debris.
2. Place throttle in START position
.
Throttle
3. Pull choke out (Honda engine only).
Choke
1
2
3
5
6
7
4