Advanced
Configuration options within the Advanced section are for users who wish to take advantage of the
more advanced features of the router. Users who do not understand the features should not attempt
to reconfigure their router, unless advised to do so by support staff.
Here are the items within the Advanced section:
Static Route
,
Dynamic DNS
,
Check Email
,
Device
Management
,
IGMP
and
Remote Access
.
Static Route
With static route feature, you are equipped with the capability to control the routing of the all the
traffic across your network. With each routing rule created, you can specifically assign the destination
where the traffic will be routed to.
Destination:
Enter the destination IP where the traffic is to be forwarded.
Netmask:
Enter the netmask of the destination.
via Gateway:
Enter the gateway address for the traffic.
or Interface:
Select an appropriate interface for the new routing rule from the drop down menu.
Cost:
This is the same meaning as Hop and represents the cost of transmission for routing purposes.
The number needs not be precise, but it must between 0 and 65535; usually be left at 1.
Click Apply to confirm the settings.
151
Summary of Contents for BiPAC 8500
