Configuring L2TP VPN in the Head Office
The IP address 192.168.1.200 will be assigned to the router located at the branch office. Please
make sure that this IP is not used by the head office LAN.
Connection Name:
Specify a name for the L2TP connection (
HeadOffice
).
Type:
Check
Dial in
and enter the IP address (
192.168.1.0
) assigned to the branch office network
on the Private IP Address Assigned to Dialing User field.
Peer Network IP:
Enter the IP address (
192.168.0.0
) and subnet mask (
255.255.255.0
) of branch
office network.
Username / Password:
Enter the username (
username
) & password (
123456
) to authenticate
remote worker.
Auth.Type:
Keep as default value in most of the cases.
Idle Timeout
: The connection will be disconnected when there is no traffic in a predefined period
of time.
0
means always on.
IPSec:
Enabled for enhancing your L2TP VPN security and then set the Authentication/Encryption/
Perfect Forward Secrecy/Pre-shared Key parameters. Both sites should use the same value.
Click Apply to confirm the settings.
134
Summary of Contents for BiPAC 8500
