Billion BiPAC 7820NZ Page 34 User Manual Download

Page: 34 / 100

Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) to find
out what kind of service is provided.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE(RFC2516)

VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service

Name, and Domain Name System (DNS) IP address (it can be

automatically assigned by your ISP when you connect or be set manually).

PPPoA(RFC2364)

VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain

Name System (DNS) IP address (it can be automatically assigned by your

ISP when you connect or be set manually).

DHCP Client

VPI/VCI, VC / LLC-based multiplexing, Domain Name System (DNS) IP
address (it can be automatically assigned by your ISP when you connect or
be set manually).

IPoA(RFC1577)

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway

address, and Domain Name System (DNS) IP address (it is a fixed IP

address).

Pure Bridge

VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.

Summary of Contents for BiPAC 7820NZ





































































































Search results

Summary of Contents for BiPAC 7820NZ

Reviews:

Related manuals for BiPAC 7820NZ

Brands by name

Popular brands

Billion BiPAC 7820NZ, User Manual

Search results

Summary of Contents for BiPAC 7820NZ

Reviews:

Related manuals for BiPAC 7820NZ

Brands by name

Popular brands