70
CPE from the specified LAN group.
DHCP Server
You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or enable the
router’s DHCP relay functions. The DHCP protocol allows your router to dynamically assign IP
addresses to PCs on your network if they are configured to obtain IP addresses automatically.
Disable
Disable the DHCP Server function.
Enable
Enable the DHCP function, enter the information wanted. Here as default.
Start IP Address:
The start IP address of the range the DHCP Server used to assign to the Clients.
End IP Address:
The end IP address f the range the DHCP Server used to assign to the Clients.
Leased Time (hour):
The leased time for each DHCP Client.
Option 66:
Click Enable to activate DHCP option 66 for some special devices, like IPTV Set Box.
The devices can get firmware or some special service from the TFTP server. User needs to set the
IP or hostname of the TFTP server.
Static IP List
The specified IP will be assigned to the corresponding MAC Address listed in the following table
when DHCP Server assigns IP Addresses to Clients.
Press
Add
to the Static IP List.
Enter the MAC Address, IP Address, and then click Apply to confirm your settings. But the IP
Summary of Contents for BiPAC 7800DXL
