Billion BiPAC 7402VGO User Manual Download

Page: 79 / 157

VoIP/802.11g ADSL2+ VPN Firewall Router

Chapter 4: Configuration

IPSec (IP Security Protocol)

Click

Create

to create a new IPSec VPN connection account.

After you have created the IPSec connection, account information will be displayed. (See example
above).

Enable / Disable:

This function activates or deactivates the IPSec connection. To wish

interrupting the tunnel, check

Disable

radio button and click

Apply

button to deactivate the

connection.

Name:

This is the user-defined name of the connection.

Local Subnet:

Displays IP address and subnet of the local network.

Remote Subnet:

Displays IP address and subnet of the remote network.

Remote Gateway:

This is the IP address or Domain Name of the remote VPN device that is

connected and established a VPN tunnel.

IPSec Proposal:

This is selected IPSec security method.

Summary of Contents for BiPAC 7402VGO






























































































































































Search results

Summary of Contents for BiPAC 7402VGO

Reviews:

Related manuals for BiPAC 7402VGO

Brands by name

Popular brands

Billion BiPAC 7402VGO, User Manual

Search results

Summary of Contents for BiPAC 7402VGO

Reviews:

Related manuals for BiPAC 7402VGO

Brands by name

Popular brands