VoIP/802.11g ADSL2+ VPN Firewall Router
Chapter 4: Configuration
Associate Wireless Client displays a list of individual wireless device’s MAC Address that currently
connects to the router.
You can easily by checking the box next to the MAC address to be blocked or allowed. Then,
Add
to insert to the Wireless Client (MAC Address) Filter table. The maximum Ethernet client is 16.
Port Setting
This section allows you to configure the settings for the router’s Ethernet ports to solve some of the
compatibility problems that may be encountered while connecting to the Internet, as well allowing
users to tweak the performance of their network.
Port # Connection Type:
Five options to choose from: Auto, 10M half-duplex, 10M full-duplex,
100M half-duplex or 100M full-duplex. Sometimes, there are Ethernet compatibility problems with
legacy Ethernet devices, and you can configure different types to solve compatibility issues. The
default is
Auto
, which users should keep unless there are specific problems with PCs not being
able to access your LAN.
IPv4 TOS priority Control (Advanced users):
TOS, Type of Services, is the 2
nd
octet of an IP
packet. Bits 6-7 of this octet are reserved and bit 0-5 are used to specify the priority of the packet.
This feature uses bits 0-5 to classify the packet’s priority. If the packet is high priority, it will flow
first and will not be constrained by the Rate Limit. Therefore, when this feature is enabled, the
router’s Ethernet switch will check the 2
nd
octet of each IP packet. If the value in the TOS field
matches the checked values in the table (0 to 63), this packet will be treated as high priority.
38
