Billion BIPAC 7100SG ADSL Modem/Router
26
Encapsulation:
There are eleven ways
─
PPPoE VC-Mux, PPPoE LLC, PPPoE None, PPPoA VC-Mux,
PPPoA LLC, 1483 Bridged IP VC-Mux, 1483 Bridged IP LLC, 1483 Routed IP VC-Mux, 1483 Routed IP
LLC, Classical IP over ATM, Native ATM
─
for the device to have a public IP address and then to access
Internet. You have to check with your ISP about which way is adopted.VPI: Consult the telephone
company to get the Virtual Path Identifier (VPI) number. The default value is 0.
ATM
VPI:
Consult the telephone company to get the Virtual Path Identifier (VPI) number. The default value is 0.
VCI:
Consult the telephone company to get the Virtual Channel Identifier (VCI) number. The default value
is 32.
Service Category:
Select
UBR
or
CBR
.
DHCP Client
DHCP Client:
Check to enable the DHCP client function if you want the device to get an IP address
automatically from your ISP.
Host Name:
Enter the name of your work group.
MAC Spoofing
MAC Spoofing:
The MAC Spoofing is for solving the scenario when the ISP only recognizing the
specified MAC address.
Static IP Settings
IP Address:
Enter the information provided by your ISP.
Subnet Mask:
Enter the information provided by your ISP.
Default Gateway:
Enter the gateway address provided by your ISP.
PPP
If your encapsulation is set to be PPPoE or PPPoA, the following fields must be entered.
Service Name:
This item is for identification purpose. If it is required, your ISP will provide you the
information. Maximum input is 31 alphanumeric characters.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Disconnect Timeout
seconds:
Auto-disconnect the ADSL Router when there is no activity on the
line for a predetermined period of time. You can input any number from 0 to 32767. The default value is 0
seconds.
MRU:
Maximum Receive Unit indicates the peer of PPP connection the maximum size of the PPP
information field this device can be received. The default value is 1492 and is used in the beginning of the
PPP negotiation. In the normal negotiation, the peer will accept this MRU and will not send packet with
information field larger than this value.
