Billion BiPAC 7100S User Manual Download Page 6

Billion BIPAC 7100S ADSL Modem/Router 

1.2 Package Contents 

1. 

Billion BIPAC 7100S ADSL Modem/Router 

2. 

One CD-ROM containing the driver and online manual 

3. 

One Quick Start Guide 

4. 

One RJ-11 ADSL/telephone cable 

5. 

One CAT-5 straight LAN cable 

6. 

One power adapter 

1.3 BIPAC 7100S Features 

BIPAC 7100S ADSL Modem/Router provides the following features: 

 

ADSL Multi-Mode Standard: 

Supports downstream transmission rates of up to 8Mbps and 

upstream transmission rates of up to 1024Kbps.  It is compliant with Multi-Mode standard (ANSI 
T1.413, Issue 2; G.dmt (G.992.1); G.lite (G992.2); G.hs (G994.1)). 

 

Multi-Protocol to Establish A Connection: 

Supports PPPoA (RFC 2364 - PPP over ATM 

Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed), PPP over Ethernet 
(RFC 2516) and IPoA (RFC1577) to establish a connection with ISP. The product also supports VC-
based and LLC-based multiplexing. 

 

Quick Installation Wizard: 

Supports a WEB GUI page to install this device quickly. With this wizard, 

an end user can enter the information easily which they from the ISP, then surf the Internet 
immediately. 

 

Universal Plug and Play (UPnP) and UPnP NAT Traversal: 

This protocol is used to enable 

simple and robust connectivity among stand-alone devices and PCs from many different vendors. It 
makes network simple and affordable for users. UPnP architecture leverages TCP/IP and the Web 
to enable seamless proximity networking in addition to control and data transfer among networked 
devices. With this feature enabled, users can now connect to Net meeting or MSN Messenger 
seamlessly. 

 

Network Address Translation (NAT): 

Allows multi-users to access outside resource such as 

Internet simultaneously with one IP address/one Internet access account. Besides, many application 
layer gateway (ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News, Ping and 
others. 

 

Domain Name System (DNS) relay:

 Provides an easy way to map the domain name (a friendly 

name for user such as 

www.yahoo.com

) and IP address. When local machine sets its DNS server 

with this router’s IP address. Then every DNS conversion request packet from the PC to this router 
will be forwarded to the real DNS in outside network. After the router gets the reply, then forwards it 
back to the PC. 

 

Dynamic Domain Name System (DDNS):

 The Dynamic DNS service allows you to alias a dynamic 

IP address to a static hostname. This dynamic IP address is the WAN IP address. For example, to 
use the service, you must first apply an account from this free Web server http://www.dyndns.org/. 
There are more than 5 DDNS servers supported. 

 

PPP over Ethernet (PPPoE): 

Provides embedded PPPoE client function to establish a connection.

 

Users can get greater access speed without changing the operation concept, sharing the same ISP 
account and paying for one access account. No PPPoE client software is required for local 
computer. The Automatic Reconnect and Disconnect Timeout (Idle Timer) functions are provided, 
too. 

 

Virtual Server: 

User can specify some services to be visible from outside users. The router can 

detect incoming service request and forward it to the specific local computer to handle it. For 

Summary of Contents for BiPAC 7100S

























































Reviews: