Chapter 3 Configuration
25
Virtual Circuit
Virtual Circuit: Enable/Disable
the settings of this VC.
Bridge:
If you set this device to be bridge mode, select Enable; if not, please select Disable.
IGMP:
You can Enable or Disable this function.
Encapsulation:
There are eleven ways
─
PPPoE VC-Mux, PPPoE LLC, PPPoE None, PPPoA VC-Mux,
PPPoA LLC, 1483 Bridged IP VC-Mux, 1483 Bridged IP LLC, 1483 Routed IP VC-Mux, 1483 Routed IP
LLC, Classical IP over ATM, Native ATM
─
for the device to have a public IP address and then to access
Internet. You have to check with your ISP about which way is adopted.VPI: Consult the telephone
company to get the Virtual Path Identifier (VPI) number. The default value is 0.
ATM
VPI:
Consult the telephone company to get the Virtual Path Identifier (VPI) number. The default value is 0.
