Billion BIPAC 6500 User Manual Download Page 6

Page: 6 / 61

Billion BIPAC 6500 Broadband VPN Firewall Router

1.2 Package Contents

1. BIPAC

6500

2. One CD containing the on-line manual and application program

3. One Quick Start Guide

4. One CAT5 cable

5. One

power

adapter

1.3 BIPAC 6500 Features

BIPAC 6500 provides the following features:

Network Protocols and Features

• PPPoE, PPTP and DHCP client connection to ISP

• NAT, static routing and RIP-1/2

• Supports multiple Application Level Gateway (ALG) algorithms for multimedia applications,

such as ICQ, NetMeeting, MS Messenger, QUAKE, Real Player, etc.

• Universal Plug and Play compliant (UPnP)

• Dynamic Domain Name System (DDNS)

• Virtual Server and DMZ

• SNTP and DNS relay

Management

• Easy Web-based GUI for remote and local management

• Firmware upgraded and configuration data upload and download via Web-based GUI

• Support DHCP server to manage local IP network easily

• Real-time attack alert and system log

Firewall

• Built-in NAT firewall

• Prevent DoS attacks including IP Spoofing, Land Attack, Smurf Attack, Ping of Death, TCP
SYN Flooding, etc.

Summary of Contents for BIPAC 6500






























































Search results

Summary of Contents for BIPAC 6500

Reviews:

Related manuals for BIPAC 6500

Brands by name

Popular brands

Billion BIPAC 6500, User Manual

Search results

Summary of Contents for BIPAC 6500

Reviews:

Related manuals for BIPAC 6500

Brands by name

Popular brands