Billion BiPAC 6200NXL User Manual Download

Page: 95 / 147

FTP Server

FTP Server:

Enable or Disable FTP Server function

Default setting is set to disable.

Enable Ftp Access From WAN:

Enable or Disable access FTP Server from WAN

Default setting is

set to disable. Enable this function, both WAN and LAN can use FTP server.

Anonymous Login:

Enable or disable Anonymous Login. Default setting is set to disable.

Anonymous Permit:

Enable or disable Anonymous Permit. Default setting is set to disable. If you

enable this function,

this will permit the anonymous user to edit directory.

FTP Port:

Enter FTP port in this field; please avoid conflicts with other port.

Max. Users:

This option specifies the maximum number of user accounts.

Stay Timeout:

Enter the Stay timeout value. Auto-disconnect when there is no activity for a

predetermined period of time. The default value is 240 seconds.

Click

Apply

to save the configuration.

Summary of Contents for BiPAC 6200NXL




















































































































































Search results

Summary of Contents for BiPAC 6200NXL

Reviews:

Related manuals for BiPAC 6200NXL

Brands by name

Popular brands

Billion BiPAC 6200NXL, User Manual

Search results

Summary of Contents for BiPAC 6200NXL

Reviews:

Related manuals for BiPAC 6200NXL

Brands by name

Popular brands