Chapter 3 Installation and Configuration
43
3.4.3.6.6 SNMP (7100S only)
Simple Network Management Protocol (SNMP) is an optional feature that may or may not be supported
by your ADSL Bridge/Router.
SNMP is an application layer protocol that is used for managing networks. SNMP is an optional feature
that may or may not be in the specific firmware that you are working with. There are several components
that make up the SNMP structure, including agents, network management stations (NMS), network
management protocols, and a management information base (MIB). An SNMP agent is a node that
resides on the network, typically a computer or a router. The SNMP agent is controlled and configured by
the NMS by sending SNMP messages between one another. SNMP agents are logged and identified in a
Management Information Base (MIB), in which they are identified by an object identifiers (OID).
One feature of SNMP is SNMP traps. SNMP traps are used to notify network managers of significant
events that have taken place in the network. These traps are sent to the SNMP NMS (NMS Server
located at Trap IP) through the specified ports.
SNMP System Identification:
The System Name, System Contact, System Location, and System OID
are provided to identify the SNMP NMS. The System OID is the ID number placed in all Trap reports.
The System Name, System Contact, and System Location can be up to 127characters. Default value for
System OID is 1.3.6.1.4.1.4900.
Read Community:
This is the password to access public information.
The Read Community can be up to 127 characters. Default is “public.”
Write Community:
This is the
password to access private information.
The Write Community can be up to 127 characters. Default is “private.”
Trap Community:
This is the
password to access and view SNMP traps.
The Trap Community can be up to 127 characters. Default is “trap community.”
Trap SNMP Version:
Select from Version 1 or Version 2. Default is Version 1.
Trap IP:
This is the IP address to which SNMP
traps are sent. There can be up to 5 different SNMP trap destination IP addresses.
Trap Port:
This is the
corresponding port for the SNMP trap (see
Trap IP
above)
3.4.3.6.7 Static Routing
If you have another router with a LAN-to-LAN connection, you may create a static routing on the router
that is the gateway to Internet.
Summary of Contents for ADSL Modem / Router BIPAC-711C2
Page 1: ...BIPAC 711 C2 7100S ADSL Modem Router User s Manual...
Page 2: ......
