Chapter 3 Installation and Configuration
29
3.4.3.1 WAN
Pvc0 is set as default and then press submit.
The screens below contain settings for the WAN interface toward Internet.
Per VC Settings
There are eight Virtual Circuits (VC) for you to set, from VC 0 to VC 7. Before you make the settings,
please scroll down to the button of the page and select the item of
Virtual Circuit
you want to configure.
Enabled? :
Select
Yes
if you want to enable the settings of this VC or select
No
if you want to disable the
settings of this VC.
VPI:
Consult the telephone company to get the Virtual Path Identifier (VPI) number. The default value is 0.
VCI:
Consult the telephone company to get the Virtual Channel Identifier (VCI) number. The default value
is 32.
Static IP Address:
Enter the information provided by your ISP.
Summary of Contents for ADSL Modem / Router BIPAC-711C2
Page 1: ...BIPAC 711 C2 7100S ADSL Modem Router User s Manual...
Page 2: ......
