Billion 810VNTX Router
Page | 116
Using port forwarding does have some implications, as outside users will
be able to connect to PC’s on your network. For this reason, you are
advised to use specific Virtual Server entries for the port your application
requires instead of using DMZ. Doing so will result in all connections from
WAN to attempt to access the public IP your DMZ specifies.
If you have disabled NAT in the WAN-ISP section, the Virtual Server will not
function. If the DHCP option is enabled, you must be careful while
assigning IP addresses to Virtual Servers in order to avoid IP conflicts.
The easiest way of configuring a Virtual Server is to assign static IP
addresses to each Virtual Server PC, with addresses that do not fall into
the range of IP addresses reserved for DHCP. If you configure the IP
address manually, be sure that it is in the same subnet.
Application:
HTTP_Sever
Time Schedule:
Always On
Protocol:
tcp
External Port:
80-80
Redirect Port:
80-80
IP Address:
10.0.0.2
Add:
Click it to apply your settings.
Edit/Delete:
Click it to edit or delete this virtual server application.
Attention
Summary of Contents for 810VNTX
Page 1: ......
