Setting Up Your Clock
For Wind-Up
Mantel & Wall Clocks
1. Unpack
Remove contents from master carton:
Pendulum
- Select models only
,
usually
fastened to side of car
ton, sometimes f
astened
to inside of clock cabinet.
Clock
- Remove protective plastic bag.
Winding Crank
Warranty
2. Locate Access to Clock Mechanism
There are two possible mechanism
access options:
Back Panel
Front Door
3. Remove Mechanism Packing Material
Carefully remove the cushions supporting the
chime rods and hammers. Slide the cardboard
pad off of the chime rods (Fig. 2).
4. Secure Clock
Position clock in its final location,
av
oiding
direct sunlight, heating/air conditioning v
ents,
heavy traffic or play areas.
Hanging Clocks:
Be sure clock is level, front to back and side
to side. Use a screw with a
suitable
head and
fasten into
raw plug
. If clo
ck
cannot be
located on a
screw
use appropriate siz
e
wall
bolt or other suitable anchor. Hang clock on
metal hanger or hole drilled into upper back
of clock.
Some wall clocks have a beat plate on the
lower inside of the cabinet (Fig. 3). There is
a hole in the plate used to f
asten the bottom
of the clock to a wall with a nail or screw, to
prevent the clock from swinging sideways.
Front Door
Access
Back Door
Access
Fig. 1
Chime
Rods
Fig. 2
Cardboard
Packing
Chime
Hammer
Beat Plate
Fastening Hole
Fig. 3
3
Chime Hammers
Chime Rods
Time Adjustment
Screw
Hour Hand
Minute Hand
Chime On/Off
Selector
Chime Wind
Strike Wind
Time Wind
2
BilliB
BilliB
