Bild CellarPro 800 WINE ROOM, Owner'S Manual

Page: 3 / 42

B I L D W I N E C A B I N E T S
-3-
I. I M P O R T A N T N O T E S
•
WHEN TAKING DELIVERY OF YOUR WINE ROOM, FOLLOW THE INSPECTION
PROCEDURES DESCRIBED IN CHAPTER II.
•
YOU MAY PLUG IN THE COOLING UNIT AT TIME OF DELIVERY TO TEST THAT IT
WORKS. ONCE TESTED, WE RECOMMEND SWITCHNG “OFF” THE COOLING
UNIT AND WAITING FOR 24 HOURS BEFORE NORMAL OPERATION.
•
THE COOLING UNIT SHOULD BE PLUGGED INTO AN OUTLET CONNECTED TO A
DEDICATED 15-AMP CIRCUIT
•
IF THE WALL OUTLET IS DIRECTLY BEHIND THE WINE CABINET, USE AN EXTENSION
CORD (GROUNDED; 14 GAUGE OR THICKER) AND COIL THE EXCESS AT THE
TOP OF THE CABINET SO THAT YOU WON’T NEED TO MOVE THE WINE CABINET
IN THE EVENT THAT THE COOLING UNIT NEEDS TO BE REPLACED.
• WE RECOMMEND PLUGGING THE COOLING UNIT INTO A SURGE PROTECTOR
(MINIMUM OF 15-AMPS) TO PROTECT THE ELECTRICAL COMPONENTS FROM
POWER SURGES OR SPIKES.
• THE COOLING UNIT SHOULD BE “OFF” WHEN LOADING LARGE QUANTITIES OF
BOTTLES. IF THE COOLING UNIT RUNS WHILE THE DOOR IS OPEN, IT WILL CAUSE
EXCESS CONDENSATION, LEAKING AND A REDUCTION IN COOLING POWER.
P L E A S E N O T E!
When assembling this unit the components are large and difficult to handle due
to the size and weight. BE CAREFUL WHEN HANDLING AND POSITIONING THE
COMPONENTS .