61
USE AND MAINTENANCE MANUAL
Tare: tare value + unit of measurement
The indications
and
will light up.
If the tare is preset and multiple tares were not set:
Tare C: preset tare value + unit of measurement
The indications
and PT will light up.
WARNING
The wording C Tare which is the tare viewed on the display is an "encoded" tare to which a
numerical code was attributed.
If multiple tares were set during installation:
Tare T:
acquired tare val. + unit of measurement
Tare 1 PT measurement:
preset tare val.
+ unit of measurement 1
Tare 2 PT measurement:
preset tare val.
+ unit of measurement 2
Or
Tare C PT measurement:
preset tare val.
+ unit of measurement
Tare 1 PT measurement:
preset tare val.
+ unit of measurement 1
Tare 2 PT measurement:
preset tare val.
+ unit of measurement 2
Or
Tare PT:
non-encoded tare val.
+ unit of measurement
Tare 1 PT:
preset tare val.
+ unit of measurement 1
Tare 2 PT:
preset tare val.
+ unit of measurement 2
The indications and PT will light up.
WARNING
Tare 1 and Tare 2 are also tares recalled by a numerical code.
Extraction (*)
This type of operation is possible if load extraction or unload extraction mode has been set.
The gross weight, the extract weight and the weighing symbols are shown on the display.
General data
Aside from the weight and the usual weighing signals,
the current operator code and description are also displayed.
Personalized
Can be enabled when the display is customised from the set up
A maximum of 10 general values can be entered. The values are displayed one
after another, separated by a space. 1 to 3 rows on the display are used to view
the data according to the length of the entered data. When all
rows are completely engaged, no more data can be entered. The
size of the weight display depends on the space occupied
by general data.
5.3.4 Memory status
If there is a low percentage of memory left free, recover memory by following this path:
...>MENU>Memory status
