manualshive.com logo in svg

Bilanciai D450, User Manual

Share
Download
Bilanciai D450 User Manual Download Page 60

autozero

On power up, the terminal performs the
autozero procedure. In the case of a legally
approved instrument, the autozero will be
within a range of -5% and +15% of the
full-scale value around the calibrated zero. In
the case of a non-legal weighing instrument,
the range is -50% to +50%.

11.6.3 Setup Menu/ANALOGUE scale/Analogue scale
parameters

Conversion rate

The number of conversions per second the
AID converter makes can be displayed (but
not modified).

11.6.4 Setup Menu/DIGITAL scale/Digital scale parameters

N. of load cells

The number of cells in the system can be
displayed.

Baud rate

The baud rate of the dialogue with the load
cell selected during the installation phase can
be displayed.

11.6.5 Setup Menu/Scale/Calibration/Display data

Calibration data (Zero, Full-scale, 1

st

 intermediate point, 2

nd

intermediate point) are displayed both as weight values in the current
unit of measurement and in internal conversion points.

D450

2-60

Summary of Contents for D450




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands