Bilanciai D440IS, Advanced User'S Manual

Page: 66 / 115

D440IS
2-66
Type of Cutting
Establishes the way the cutter operates at the
end of each print.
If you select:
✔
NO no cut will be made;
✔
Partial a partial cut will be made;
✔
Complete a full cut will be made.
STB60
Thermal printer
Tape ejection: YES, NO
Moves the printing form forwards so that it
positions correctly for tearing.
Type of Form
Defines the type of printer form used, which
can be Tape, Label
Print Density
Determines the printing density:
Very light, Light, Norm, Dark, Very dark
Label ejection
Allows the label to be ejected at the end of
each print and the next label re-aligned.
If the following are selected:
✔
Automatic, the label is ejected in the
automatic mode;
✔
Software, label advancement is controlled
by the terminal;
✔
NO, ejection and subsequent label
re-alignment are not controlled.