Turning on your display
● Press and hold the
POWER
button to turn your display on.
● The display will power down after 10 minutes of no operation.
Turning off your display
● Press and hold the
POWER
button to turn your display off.
Choosing your assist level
● Press the
MENU
button to change your PAS level. The display will scroll through
levels in the order of 0 →1→2→3→0.
Enabling and Disabling the throttle
● Use the red button on the right handlebar to enable and disable the bike throttle.
● When the button is pressed in the throttle is enabled.
● If the button is not pressed/outwards the throttle will be disabled.
Operating the headlight and tail light
● Tap the
POWER
button with the display turned on to turn on the headlight and
tail light.
● Tap the button again when the lights are turned on to turn them off.
● Turning on the lights will also turn on the display’s backlight.
Switch between TRIP meter and ODOMETER
● Hold the
MENU
button to switch the display between ODOMETER and TRIP
meter.
Entering the Settings Menu
•
Note: This function only works for certain bikes. If after holding the buttons for 5
seconds you do not see P1 show up your display does not have this ability.
