Change units between Km/H and MPH
Hold the
UP
or
DOWN
buttons to select between Metric or Imperial units for speed and
distance. After setting your preferred units short press the
POWER
button to re enter the
Maximum Motor Speed setting or hold the
POWER
button to save setting values and return to
Display 1.
*When adjusting any of the above three settings you can hold the
POWER
button to save
changes and return to Display 1. The screen will also return to Display 1 if you do not press
anything for 1 minute.
Changing Display Back Light Level
Use the
POWER
button to turn on your display. Next, hold the
UP
and
DOWN
buttons within
5 seconds of turning on the display. If you don't get it the first time, turn the display off and
then turn it on again before holding the
UP
and
DOWN
buttons.
Press the
POWER
button THREE times until the information on the screen stops flashing.
Then HOLD the
UP
and
DOWN
buttons for 5 seconds. Press the
POWER
button FIVE times
until you see P5 appear on the display and the information is no longer flashing.
Next, HOLD the
UP
and
DOWN
buttons again. Press the
POWER
button FIVE times to
advance to C6. Then use the
UP
and
DOWN
buttons to adjust "Display Back Light". The
dimmest setting is 1 and the brightest setting is 6. When you have set the preferred
brightness level, PRESS the
POWER
button to save your selection, then HOLD the
POWER
button to exit the settings menu.
Summary of Contents for KT-LCD5
Page 7: ......
