General Display Settings
Setting Maximum Motor Speed
Within 5 seconds of powering on the bike, hold the
UP
and
DOWN
buttons at the same time.
MXS and Km/H (MPH if you have the display set for that) will flash. Use the
UP
and
DOWN
buttons to raise or lower the maximum motor speed where the motor will power the bike up to.
Hold the
POWER
button shortly to save this value and go to the next parameter.
Wheel Diameter Setting
Hold the
UP
or
DOWN
buttons to set the wheel diameter used by the controller to determine
bike speed.
This does not need to be changed unless you put a different sized wheel on
the bike
. Select the value in the range of 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 700c and 28
inches. Hold the
POWER
button shortly to save and go to the next parameter.
Summary of Contents for KT-LCD5
Page 7: ......
