Change Speed and Distance Units Displayed
Set 4 will be displayed. Use the
UP
and
DOWN
buttons to change the units used by the
display for speed and distance. These can be toggled between KM/H and MPH. Press the
SET
button when changed to your preferred selection to save the setting.
Default Voltage Selection
You do not need to change this
– it will be set correctly from the manufacturer.
Entering the Advanced Settings Interface
While in the Settings Interface press and hold the SET and DOWN buttons for 10 seconds.
You can save any changes and exit this mode by holding the SET key.
SOME OF THE
SETTINGS IN THE MENU ARE NOT TO BE CHANGED
–
Biktrix is not liable for any
changes being made resulting in corruption of the motor controller or motor
functionality.
Velocity Measurement Setting
This setting does not need to be changed.
