Wheel
Display will show Hd. Press the
UP
and
DOWN
buttons to change wheel diameter
setting. You do not need to change this unless you are putting different diameter wheels
on your bike than it came with. Press the
MODE
button to save changes and move to
the next parameter.
Password
Display will show Pd. You will need to enter the password for the display to change the
following settings. Use the
UP
and
DOWN
buttons to change the value of a digit. Press
the
MODE
button to set the digit and move to the next digit. The default password is
1919
.
Speed Limit
Display will show SL. Press the
UP
and
DOWN
buttons to change the max speed limit
for the motor
– above this speed the motor will no longer power the bike. Vale can be
set between 10 km/h and 100km/h
– note that you may not be able to reach the set max
speed due to limitations of the bike and controller.
Hall
Display will show HL. This setting does not need to be changed. Press the
MODE
button to move to the next parameter.
