page 11
Important hint when visiting the repair-shop or
software-updates on your pedelec
If you have in mind to update your pedelec software or wish to perform
the TQ- or Spitzing-system with a customer service, please have a look on
bikespeed and check on our website www.bikespeed.de, whether the
tuning continues to work with a later software or not.
For a software-update to your TQ- or Spitzing-system you have to
uninstall the bikespeed-RS. Alternatively, there is the service mode on the
bikespeed-RS that needs to be activated at your retailer.
Therefore, change the level of support 3x down and then 3x up. Please
enter the combination continuous without a pause longer than 3 seconds
between two keys. Begin on the highest level. If successful, the
speedometer display changes 3 times between the software version of
the bikespeed-RS and 0 km/h. Now the tuning is in service mode and
maintenance as well as software updating can be executed.
If you have a bikespeed-RS
c
you use the combination you chose
beforehand. (see page 13, paragraph Description of the
custom
-variant“)
This state is maintained even after deactivating the system. That is why
there will not be an animation of the battery’s capacity informing about
the state of the tuning.