4366
10/2019
177
ATTACHING AND REMOVING THE WHEELS
Lift back of the trailer up. Insert the wheel axle to the axle bracket. Lock the safety bracket in the
hole, tighten and close the quick-release. Check that the axle is secure by pulling away from trailer.
Remove the wheel guard and unlock the safety bracket and loosen the quick-release while pulling the
wheel away from trailer.
Warnings
For easy towing and safe handling, check tires often for proper inflation and wear. Check tire
pressure regularly. Always maintain the tires within pressure range indicated on tire sidewall.
ATTACHING THE REFLECTORS
Place reflectors behind the trailer.
German > wheel reflectors must be replaced without fail. Use the
reflectors included in the labelled pack.
CAUTION
4 Rückstrahler
DIN
CAUTION
The reflectors that comply with the homologated regulations shall be visible on the rear of
the trailer.
Never use the vehicle at night without adequate lighting and reflectors, obey all local laws
for lighting and reflectors in accordance with homologated requirements. In order to meet
homologated Safety Standards, a reflector must be in place on the tear of the trailer.
A
A
B
B
German
CAUTION
x2 : LR 44 - 3 V
Electrical and electronic equipment is disposed of separa-
tely. Do not throw away electrical and electronic equipment
with other unsorted rubbish, but ensure it is disposed of
separately and appropriately. Do not mix new batteries with
used ones. Do not throw used batteries away. Take them to
a shop which will recycle them.
