15
INSTALLING BICYCLE PARTS
WARNING
•
Before using the product, follow the procedures below to check that the parts are properly installed.
Check that all the parts are firmly fixed as well. If they are not fixed sufficiently firmly, it can lead to unexpected accidents.
Installing the handlebar
1.
Operate the quick release lever to open the clamp and set the handlebar.
Supported handlebar diameter: ø31.8 mm
Handlebars with a diameter of ø26.0 mm can also be
supported by using the handlebar spacer.
Quick release lever
Clamp
Note:
The stem included in the package is only for Bike fitting system.
Do not use it for bicycles.
2.
Close the clamp and set the quick release lever into the slit of the clamp.
Then, lower the quick release lever and fix the handlebar.
Adjustment nut
3.
If the quick release lever can be easily set to the CLOSE position, it means that the handlebar is not fixed sufficiently firmly.
Return the quick release lever to the vertical position and turn the adjustment nut at the bottom of the lever to adjust the
tightness.
* When removing the handlebar, reverse the procedure.
