Usage Instructions
English
4
Usage Instructions
English
4
- Do not use damaged batteries.- The battery is subject to the dangerous goods laws. Any transfer by a third party or carrier should strictly
adhere to the packaging and label requirements. Please read the detailed rules for the local market and pay attention to them. Please
protect it with a knock and fix the battery firmly to avoid movement of the packaging.
- Always follow the local laws for the disposal of used batteries.
- Make sure that the battery is used for a particular tool. Improper or misuse may result in fire, overheating, explosion or electrolyte leakage.
- Charge the battery cartridge before you have completely discharged it. Stop working and charge the battery if you notice less tool power.
- Never charge a fully charged battery cartridge. By overcharging the charge shortens battery life.
- Charge the battery with the room temperature at 10 ° C - 40 ° C. Leave a hot battery cool before loading.
- Use the battery pack under the ambient conditions of 10 ° C -40 ° C.
- Charge the battery every six months if you do not use it for a long time.
3. Using Instructions
- It is recommended to check the charge indicator before use to ensure that the battery is fully charged.
- Press the power button to start the machine and adjust the vibration frequency according to the demand.(3 gear speed regulation)
- Place the machine on the tile to be laid, press the handle to activate the suction cup, lift the tile and apply it to the adhesive surface
and then activate the vibration.
- After one minute of non-use, the machine will switch off in order to conserve the battery, press the button again to restart it
Charging instructions
-If the indicator turn into yellow or red, recharge the battery.
- The battery will be fully charged in 2 hours, at the end the indicator will turn green to indicate full charge (the red color indicates
the charge in progress).
- The light will automatically turn off when fully charged.
4. Cleaning and Maintenance
- The machine must be stored in dry place .
- Remove any dirt or dust from the surface of the machine after use.
- Store the machine in the carry case supplied to avoid damage.
- During frequent use it is recommended to recharge the battery daily.
5. Accessories
- This accessory is recommended for use with your device specified in this manual.
- Using other accessories or attachments may result in personal injury. Only use accessories or accessories for the stated purpose.
6. Environmental Protection
- Do not dispose of electrical appliances in the household waste.
- Follow the local provisions for the disposal of electrical or battery products.
- Valuable materials can be recovered by recycling.
- The electrical or battery components used for construction are in accordance with the regulation European Directive 2012/19 / EU on
waste electrical and electronic equipment and transposition into national law., used electrical appliances must be collected separately
and recycled in an environmentally sound manner.
- Contact us for further information.
7. Warranty
- The guarantee covers all manufacturing or assembly defects in accordance with the legislation in force. The guarantee does not cover
malfunctions caused by improper use, overloads, failure to follow the operating instructions and normal wear and tear.
- For more detials and information, consult the general guarantee conditions at
www.bihuitools.com
2. Application
- Evenly distribute the adhesive under tiles and big slabs during installation.
- Suction cup with 30Kg lifting capacity.
Working Voltage
16.8V
Batter Capacity
2000mA
Charging Current
1A
Adsorption Capacity
30Kg
Vibration Frequency
5000-12000r/min
Charging time
2.0H
