9
Notes
1)
Ensure that all wires, jumper and drivers are correctly plugged in before power-
on.
2)
To avoid damage, do not plug or unplug the stepper drivers when the board is
powered.
3)
Double check all your connections before powering up the board.
4)
At the moment printing from a USB flash drive is not supported.
5)
SKR MINI E3 V1.0 is a motherboard designed specifically for the Ender 3D printer.
If you want to use another machine, please refer to the corresponding electrical
parameters of Ender3 (such as heated bed power, extruder cartridge power, etc.).
The electrical parameters of other machines should never exceed the electrical
parameters of the Ender 3. Our company will not compensate for any losses
caused.
