BIGTREETECH SKR MINI E3 V1.0, User Manual

Page: 8 / 9

8
5) Automatic shutdown after print
To make use of the automatic shutdown feature you need a BIGTREETECH Relay V1.0
module. See the user manual for the module for more information. You can find it
here:
http://github.com/bigtreetech
Firmware
By default there will be a firmware installed on the board, which is optimized for
Ender 3. It is also possible to make changes to the firmware. You can find the needed
firmware files on our Github page.
BigTreeTech firmware:
http://github.com/bigtreetech
Marlin2.0 firmware update method:
After downloading the files, use Visual Studio Code to open the project for
compilation. Customize the firmware and compile it. Check for errors. If there are no
errors, find the firmware.bin file. Copy it to the SD card and plug the SD card in the
board. Reboot the board, wait for about 10 seconds before doing anything else with
the board.
For detailed steps, please check this document:
http://www.dropbox.com/s/ppjfflhf3j5yzh2/MarlinV2.0%20SKRV1.1%20instruction.d
ocx?dl=0
Note: File name cannot be changed, firmware.bin must be lowercase!