Shenzhen Big Tree Technology CO.,LTD .
BIG TREE TECH
26 / 39
#define
POWER_LOSS_RECOVERY
// enable power loss recovery
#define
PLR_ENABLED_DEFAULT true
// true default to power loss recovery
enanbled
#define
POWER_LOSS_ZRAISE
10
// raise the print head by 10mm after
power loss to prevent the nozzle from touching the printed part.
#define
POWER_LOSS_STATE HIGH
// set signal level， UPS 24V V1.0 returns
low level when not triggered and HIGH level when power is cut, thus this
setting needs to be HIGH.
4.3.10 RGB
#define
NEOPIXEL_LED
// enable Neopixel
#define
NEOPIXEL_TYPE NEO_GRB
// set Neopixel type
//#define NEOPIXEL_PIN 4
// disable PIN setting，use the correct signal pin
in the pin file of the motherboard
#define
NEOPIXEL_PIXELS
30
// number of leds
#define
NEOPIXEL_STARTUP_TEST
// the light will show red green and blue
sequentially to self-test.
