Shenzhen Big Tree Technology CO.,LTD .
BIG TREE TECH
24 / 39
#define
GRID_MAX_POINTS_X
5
// set number of probe points for x axis, usually
5 point is sufficient
#define
GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
// set number of probe points
for Y axis to the same as X axis
If bltouch also functions as your Z homing sensor，no wiring change is needed,
#define
USE_PROBE_FOR_Z_HOMING
// use Z Probe(BLtouch) for Z homing
#define
Z_SAFE_HOMING
// home Z at the center of print bed to prevent probing
outside of the print bed.
