Rumba32 V1.0 mannul
SHENZHEN BIGTREE TECHNOLOGY CO., LTD.
15
/
15
Marlin2.0 firmware.
2
、
U disk function is temporarily not supported,so stay
tuned!
3
、
The power of the hot bed connected to the motherboard
must be less than or equalto180W(that is,the resistance value
of the hotbed is greater than 0.8
Ω
),if a high-power heating
be disused,an external heating bed power expansion board must
be connected;
4
、
When supplying 12V/24V power to the motherboard,be sure
to pay attention to the positive and negative poles of the
power supply.
5
、
Before powering on,ensure that all wires,jumpers,and
Drivers are plugged incorrectly and completely.
6
、
Do not plug or unplug the drive module with power to
7
、
When wiring the motherboard,be sure to pay attention
to the correctness of the positive and negative poles of the
power supply,drive direction,and power supply selection
before powering on.avoid damage.
