Rumba32 V1.0 mannul
SHENZHEN BIGTREE TECHNOLOGY CO., LTD.
12
/
15
At this point,click"Finish"to complete the installation.
After the installation is complete,we can check again under"Computer->Management->
Device Manager""Universal Serial Bus Controller"will appear"STM Device in DFU Mode".
AtthistimeyoucanuseDfuprogrammingsoftwareforofflineburningWrite,but the steps are
cumbersome.Our purpose is to perform online programming in the Vs code Platform IO
environment.In principle,it can be burned online in the Vs code Platform IO environment at
this time,but an error occurred during the burn,and the driver may be abnormal after
Consulting the data.At this time,we need to install the following software to repair the
Driver problem.As shown:
Double-click to run this software
