Remove the lid from the smoking chamber by removing bolt and
washer and sliding the hinge pins on the lid out of the hinge holes
on the cooking chamber. Set bolts and washers aside for step 18.
Step 1
Place the grill body assembly on its end. Make sure that another
person is holding the grill body assembly steady.
Attach one long leg to the grill body assembly with M6 x 12 bolts
(AA), M6 nuts (DD) and flat washers (GG).
Attach one short leg to grill body assembly with M6 x 12 botls
(AA), M6 nuts (DD) and flat washers (GG).
Note: Keep the bolts and nuts loose.They can be tightened after
the wagon wheels and bottom shelf are assembled.
Step 2
AA
M6 x 12 Bolt
Hardware Used
8pcs
r. Lay
bly area.
Step 1
Step 2
Assembly Instructions
7
Choose a good, cleared assembly area and get a friend to help you put your smoker together. Lay cardboard down to protect
smoker finish and assembly area.
DD
GG
M6 Nut
8pcs
8pcs
Insert the bottom shelf into mounted legs.
Attach remaining two legs by inserting the hooks of the wire rack
through the holes in the legs, and then attaching to the front side
of the cooking chamber with M6 x 12 bolts (AA), M6 nuts (DD)
and flat washers (GG).
Make sure that the wheel leg is on the side of the cooking chamber
with the smoke stack hole. Tighten all leg bolts.
Step 3
Step 3
Flat Washer
AA
M6 x 12 Bolt
Hardware Used
8pcs
DD
GG
M6 Nut
8pcs
8pcs
Flat Washer
Smoking chamber
Bolt
Washer
Short leg
Long leg
AA
DD
GG
AA
DD
GG