
Assembly Instructions
Attach front table bracket L to smoking chamber with M6 x 12
bolts (AA) and M6 nuts (DD).
Attach front table bracket R by inserting the hooks of front table
ends through the slots on front table bracket R & L as shown,
and then attaching to smoking chamber with M6 x 12 bolts (AA)
and M6 nuts (DD).
Step 16
Step 17
Step 16
Screw temperature gauge fully into lid right side or left side as
your desire. Slightly unscrew gauge until gauge is in an upright
position. Use pre-attached nut to lock into place.
Screw temp gauge bracket plug into lid another side.
Step 17
13
AA
M6 x 12 Bolt
Hardware Used
4pcs
DD
M6 Nut
4pcs
AA
DD
AA
DD
Temp gauge bracket plug
Temperature gauge