background image

LIGHTING INSTRUCTIONS

1. Open the sliding door using the poker, and put the log(s) (less than 1.8kg) on the charcoal grid.

    (NOTE: Make sure log does not extend to the charcoal grid edge, and the log height does

     not extend 35.6cm. The fire height should not extend 3/4 the height of screen.)

2. Light dry wood chips under logs. Close the sliding door with poker.

Inspecting

Inspect this chimenea on a regular basis to ensure product safety and longer product life.

DO NOT attempt to inspect this outdoor chimenea until the fire is COMPLETELY out and cooled

down.

1. Check handles to make sure they are secure.

2. Check components for any signs of damage or rust.

3. If you detect damage to any component, do not operate until you make repairs.

Cleaning

Make sure the fire is completely out when you are no longer using the chimenea.

Make sure the fire is completely out before you clean the ash tray. Sweep the ash into the ash tray,

pull ash tray out and empty it.

Use a damp cotton cloth to remove the smoke stain from the mesh cover and chimney cap.

Clean this outdoor chimenea on a regular basis to promote safer experiences and longer product 

life.

Note: After repeated use, the finish may become discolored.

DO NOT attempt to clean this outdoor chimenea until the fire is COMPLETELY out and cooled 

down.

DO NOT use oven cleaner or abrasive cleaners as they will damage this product.

DO NOT clean any part of this outdoor chimenea in a self-cleaning oven as it may damage the 

finish.

1. Wipe exterior surface with a mild dishwashing detergent or baking soda.

2. For stubborn surface stains use a citrus-based degreaser and a nylon scrubbing brush.

3. Rinse clean with water.

4. Remove built-up creosote from components with a chimenea cleaning product.

Storage

DO NOT move or store this outdoor chimenea until the fire is COMPLETELY out and cooled down.

1. Once the fire is out, (coals are cold and outdoor chimenea is cool to touch), remove ashes and

    properly dispose.

2. Cover outdoor chimenea with the PVC cover (not included).

3. Store assembled in a location away from children and pets.

Note:

 If you do not use a cover, store this outdoor chimenea in a dry location to maximize product 

          life.

CARE AND MAINTENANCE

8

Summary of Contents for CHIMENEA SRCH06D









Reviews: