Page 20
Form # B15-790
®
®
®
Troubleshooting Continued
Problem
Cause
Correction
Toolbar bending.
Loading beyond design limit with
deep tillage tools such as bed rip-
pers, irrigation shovels, etc.
Attach cable pull ears from each
end of the toolbar to the front of
the tractor.
Bending and twisting of coulter
assembly.
Turning with the coulter in the
ground with rigid tractor hitch.
Make sure coulter clears ground
before turning at the end of the
row.
Coulter bearing failure.
Running coulter too deep.
Adjust coulter setting. Never run
coulter hub or bearing in the dirt.
Use and Care Tips From the Factory
•
Spending the time to properly set your cultivator in the beginning will pay dividends in the end.
•
When rebuilding spider gangs make sure the spiders are timed properly. Number 1 spiders are
equipped with a single timing mark and number 2 spiders are equipped with a double timing mark. Timing
marks are to be set 90 degrees out from any adjacent spiders.
Assistance
•
If you have questions not answered in this manual or require additional copies, please contact your dealer
or Bigham Ag.
705 East Slaton Road, Lubbock, Texas, 79452
Office: (800) 692-4449 Fax: (806) 745-1082
www.bighamag.com
Summary of Contents for Lilliston Rolling Cultivator Generation 3
