ARMORX is already paired with the adapter in the factory. The only situation you
need to pair it with is that the connection of ARMORX and adapter is failed.
The steps of re-pair:
1. After the ARMORX is on, hold the + until the LED1 fast flashes, the
ARMORX enters pairing mode.
2. Plug the adapter into the console and hold the pair button on the adapter until
the indicator fast flashes, the adapter enters the pairing mode.
3. When the LED1 and adapter indicator fast flashing means it is pairing. Please
wait for it until the LED1 and adapter indicator become always on, the re-pair is
successful.
RE-PAIR
After opening the hair trigger you can do the next operation without waiting for the
trigger restoration. Press the trigger at any position to activate it.
1. Hold + Left trigger(LT) the LED2 will flash in cyan twice means hair trigger open
success.
2. Hold + Right trigger(RT) the LED2 will flash in cyan twice means hair trigger
open success.
The LED2 will flashed in cyan when you press the trigger with hair trigger
function.
Double click the hair trigger button will cancel all hair trigger.
HAIR TRIGGER
1. MAPPING SETTING:
Press + (M1/M2/M3/M4) to enter the mapping mode. The LED2 will breathe in
green. Then press the target button, the LED2 will flash twice. The mapping is
success.
2. CANCEL MAPPING:
Hold the button that needs to be canceled ( M1-M4 ) and double click the ,
LED2 will flash twice in green means cancel success.
4. CANCEL ALL MAPPING:
Double click the , LED2 will flash twice in green means cancel success.
MAPPING BUTTON