- EN 22 -
- When the alarm is activated, the device plays the tune for up to 30 minutes, unless the
user deactivates the alarm.
- When the alarm is active, the alarm sound begins softly and increases for 10 seconds to the
same volume you selected in listen mode.
The screen displays the alarm icons for 3 seconds each time the alarm is turned on or off, as
follows:
When changing the alarm status, the alarm icons are displayed for
3 seconds.
If the alarm is active,
the alarm status icon
is displayed in the
lower right corner.
Alarm 1
ON
Alarm 2
ON
Alarm 1 or 2 OFF
Listen to the built-in tune
- Press the < Note
> button to play the first tune. Press again to move on to the next tune.
Long-press to stop the tune. There are 3 tunes in all.
- Press the < Increase
> and < Decrease
> buttons to adjust the sound volume.
- When you select a tune, the tune icon is displayed, then the time reappears after 3 seconds.
The operating status appears for 3 seconds as in the table below:
Tune 1
Tune 2
Tune 3
Volume
20%
Volume
40%
Volume
60%
Volume
80%
Volume
100%
Varying the brightness / Using the alarm standby
- Press
<
> on the device to set the screen brightness to
"Maximum" >> "Low" >> "Off"
