Troubleshooting.
Controller is not working.
• Ensure that the power button is the ‘On’ position.
• Check that the batteries are not low. If so, replace the batteries. If power is low the Player LED will normally fl ash to indicate that the
batteries need replacing.
• Ensure that the receiver is connected to the console and press the home button on the controller to connect.
• Check that the switch on the receiver is set to PS3™ mode.
The guns are not working or jamming in my game
Check that you have selected the correct mode for your game. If the guns are still jamming, try a lower fi ring rate mode or create a
custom mode that works.
The guns are not quick fi ring
• Check that the game you are playing uses R1 for fi ring. If not program the fi ring button for that game (i.e. program R2 for rapid fi re)
• Ensure that you have not un-programmed fi ring button. If so, reprogram it.
All my buttons are rapid fi ring
Clear all of the programming by switching off and switching on again whilst pressing and holding the start and select buttons.
