- EN 3 -
OPERATION
Turn on/off the PS200 speaker
1) Press the power button, on the underside of the speaker, for 2-3 seconds. The speaker will light up
and you will hear a ‘welcome’ chime. The Bluetooth will automatically turn on.
2) Press the power button again, for 2-3 second, to switch off the speaker, light and Bluetooth.
CHARGING
1) Connect the DC charging cable to the `DC charge’ socket on the underside of the speaker. Connect
the USB to a suitable power source. NOTE: When using an AC Adaptor the output rating, of the
Adaptor, must be 5v 1A.
2) The Red LED indicator, next to the power button, will turn ON when charging, and turn OFF when
fully charged.
3) Unplug the DC charging cable after fully charged.
PLAYING MUSIC BY BLUETOOTH
1) Turn on the speaker and keep the speaker and device within 1 metre of each other.
2) Start the Bluetooth function on your mobile device and select “PS200” in the Bluetooth device
list (depending on the Bluetooth version of your device you may have to enter pass code ‘0000’).
PLAYING MUSIC FROM A USB KEY
•
Turn on the speaker and insert the USB key into the USB port on the underside of the speaker. The
music will start automatically.
PLAYING MUSIC USING THE AUX IN CABLE
•
Turn on the speaker and connect the cable to the underside of the speaker. Connect the cable to
your device and play your music.
PRIORITY OF AUDIO SOURCE: BLUETOOTH/ USB/ AUX
•
Bluetooth is set as default and the speaker will play music, via Bluetooth, after being switched on.
•
As soon as you connect a USB key the speaker will play music via the USB key. It will also play
music via USB the next time you switch on the speaker if the USB key is still connected.
•
As soon as you connect the AUX IN cable the speaker will play music via AUX IN. It will also play
music via AUX IN the next time when you switch on the unit if AUX IN is still connected.
•
If both a USB key and AUX IN are connected then the speaker will play via USB.
OPERATION BY REMOTE CONTROL
NOTE: Please remove the plastic tab from the battery cover before use.
1)
Stand by button: After powering on the speaker (by pressing the power button on the underside
of the speaker), short press this button to turn off the light and Bluetooth. Short press again to turn
on the light and Bluetooth.
2)
Brightness intensity: Changes the brightness when the light is fixed on one single colour.
3)
Light ON/OFF button: Press this button to switch the light on and off.
4)
Bluetooth function: press this button to switch into Bluetooth mode.
5)
AUX IN function: press this button to switch into AUX IN mode.
