- EN 3 -
Specifications
Micro USB Charging:
5V 2A MAX
Charging time:
6-8 hours
RGB LEDS
USB output:
5V 1A
Wireless output:
5V 2A
Operating life:
4-6 hours for playing music and lighting
Bluetooth pairing name:
BTLS Turtle / BTLS Duck
No need for password normally, but some mobile phones may need it. The password is: 0000;
Bluetooth range 10M. Receiving range will be reduced as the battery voltage decreases.
Operation
Turn ON/OFF the luminous speaker
1. Short-press the power button on the speaker bottom. The light and BT will turn on automatically.
2. Short-press the power button on the speaker bottom again. The light and BT will turn off
automatically. Only after you press the button on the speaker is the speaker truly turned off.
Remark:
Turn on sound: 3 sounds
Turn off: no sound
Paired sound: 2 sounds
Charging
1. Charge the wireless charging base with the Micro USB charging cable. The wireless charging base
has power bank function with built-in Li-ion batteries.
2.
There are 4 Blue LED indicator lights beside the USB charging port to indicate 25%, 50%, 75%
and 100% fully charged.
3.
Unplug the USB charging cable when fully charged.
4. Now you can use the wireless charging base to charge the speaker and your phone. (The phone
must have wireless charging function)
Play music by Bluetooth
1.
Pairing 2 speakers for the first time
Long-press the ON/OFF button from any one of the 2 speakers and the speaker whose Bluetooth
indicator light stays blue becomes vice and the other one flashing blue becomes master. (If both of
them beep at the same time this means they are paired successfully.)
Start the Bluetooth function on your mobile device and select “BTLS Turtle / BTLS Duck” from the
Bluetooth device list (depending on the Bluetooth version of your device you may have to enter the
pass code ‘0000’). Once connected, the Bluetooth indicator light glows blue.
2.
Pairing 2 speakers for the second time (Memory function for master and vice)
Turn on the 2 speakers and they will pair themselves automatically as they have already paired
before. The master and vice speaker will stay the same as the first time paired.
If you reset the master and the vice, you just need to repeat step 1. (Notice: This step must be
operated when the 2 speakers are powered on - if turned off they keep the same master and vice
mode as the last time paired).
