Page 8 of 10
x1
C
B
A
STEP6-B
STEP7-B
7
Option B: Using on corner wall
Please make sure the insert trims
have been assembly first.
Then carefully slide the firebox into
the completed Mantel and center
in the opening.
Attach support panel (part 7) to base
panel (part 1) using bolts (part A),
spring washer (part B) and flat
washer (part C) by Allen Key as
shown in the diagram.
Fully tighten all bolts in this step.
For corner using, please do not
assemble the support foot (part 6).
And take care to keep the support
foot for future flat wall use.
Z
Securing the firebox to the mantel by
using six screws (Z) as insert manual.
